Like its predecessors the Mini 3 and Mini 3 Professional, the Mini 4 Professional is a well-liked drone for these new to drones, these new to the sub-250g drone motion, solo content material creators, and fans alike.
As time goes by, firmware updates are integral components of drone possession. It is because these updates handle and repair bugs, implement efficiency enhancements, and in addition, sometimes, add new options.
This text and the included YouTube video might be a step-by-step information exhibiting find out how to replace the firmware on the DJI Mini 4 Professional and DJI RC 2 distant controller, in addition to the firmware on the Mini 4 Professional‘s batteries, if and when wanted.
Updating the Mini 4 Professional‘s Firmware
For some time, it was virtually regular for drone homeowners to chorus from updating their firmware, out of worry the replace would “break one thing”, or take away a helpful function.
Whereas some do stick with the unique firmware their drones have been launched with, updating your Mini 4 Professional’s firmware is helpful and advisable.
Over time, there are certainly tweaks, new options, and bug fixes added periodically. These updates enhance the consumer expertise. One such current, much-appreciated function for the Mini 4 Professional is help for DJI Goggles 2, DJI Goggles Integra, and DJI RC Movement 2.
DJI has just lately been dedicated to implementing lots of the options into the Mini 4 Professional that the bigger Mavic 3 collection has.
To replace the firmware in your Mini 4 Professional, you’ll want your:
- Mini 4 Professional
- DJI distant controller (on this occasion the DJI RC 2)
- All the batteries you personal and use for the Mini 4 Professional
Moreover, as a normal rule of thumb, it’s suggested to have the Mini 4 Professional batteries and distant controller absolutely charged earlier than operating firmware updates.
The steps to replace the firmware in your Mini 4 Professional are as follows:
STEP 1: Earlier than turning the Mini 4 Professional on, take away the gimbal cowl. This may make sure that when the Mini 4 Professional is turned on, the gimbal’s motion is not going to be impeded and trigger errors.
STEP 2: After booting up your DJI RC 2, be sure you are related to a WiFi community. To verify this, go into your settings display by double-sliding down the notification shade. In case your WiFi is just not enabled, faucet the WiFi icon and watch for a connection.
In case you are connecting to WiFi for the primary time, press and maintain the WiFi icon. This may carry you into the WiFi settings. Right here you’ll be able to connect with your most well-liked community.
STEP 3: Activate the Mini 4 Professional.
STEP 4: In the event you use your DJI RC 2 to additionally fly an Air 3 along with the Mini 4 Professional, relying on which drone was flown final, you could must scroll via the record of drones used and select the Mini 4 Professional.
Choose the Mini 4 Professional. Then select Go Fly.
In the event you solely have the Mini 4 Professional, you’ll more than likely enter the DJI Fly Digicam View display instantly.
» MORE: DJI Mini 4 Professional MasterShots (All You Must Know + Video)
STEP 5: From inside the Digicam View display, press the again button, which is able to take you to the Mini 4 Professional dwelling display.
Right here you will notice that there’s a firmware replace obtainable. Select Set up.
STEP 6: In the event you haven’t already achieved so, unfold the Mini 4 Professional, so you’ll be able to insert the following set of batteries after the preliminary replace has been put in.
Through the replace course of, the lights on the Mini 4 Professional will flash numerous colours. The DJI RC 2 will even reboot itself.
After the firmware has been put in and up to date, you could must replace every battery that you simply personal and use within the Mini 4 Professional.
STEP 7: Flip off the Mini 4 Professional, take away the battery that was initially within the Mini 4 Professional for the replace, and insert the following one. Flip in your Mini 4 Professional.
STEP 8: Hit the again button after the Mini 4 Professional activates and goes into Digicam View. If there’s a battery firmware replace, you must now see one other replace obtainable (for the battery). Choose Replace.
You’ll then be dropped at a further display that claims “replace obtainable”. Choose Replace right here, after which the Mini 4 Professional battery will replace.
It’s regular, whereas the battery is within the technique of being up to date, that the Mini 4 Professional could reboot itself, probably greater than as soon as.
After the battery has been up to date, you’ll obtain a message saying “Firmware replace profitable”. At this level, you’ll be able to exit the Replace display, returning again to the DJI Fly dwelling display.
If the Mini 4 Professional has not shut off at this level, you’ll want to show off the Mini 4 Professional, insert a brand new battery, and boot up once more for every battery that you simply personal. This may provoke the replace for the battery after which you’ll repeat the aforementioned steps.
Relying on the variety of batteries you’ve gotten, this course of can take a couple of minutes.
Manually Checking for Firmware Updates
If in case you have not been prompted routinely that there’s a new firmware obtainable, you’ll be able to manually verify for updates, by doing the next:
With the DJI RC 2 turned on and related to your WiFi community, whereas on the DJI Fly dwelling display, merely go to Profile > Settings > Firmware Replace > Examine for Firmware Updates.
After the DJI RC 2 checks for the replace, if there’s none, you’ll obtain a message saying “Your firmware is updated”.
If there’s a new firmware replace, you’ll be alerted and can have the choice to run the replace.
» MORE: DJI Mini 4 Professional vs. Mavic 3 Sequence (Right here’s My Selection)
