Learn how to Flash, Replace and Configure AM32 ESC (Backup & Restore Settings)

Making certain your ESC firmware is updated is essential for optimum efficiency and bug fixes. On this tutorial, I’ll present you the way to flash and replace AM32 ESCs, serving to you get pleasure from a easy flying expertise.

A few of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no additional value to you) in the event you make a purchase order after clicking on one among these affiliate hyperlinks. This helps help the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra info.

Be aware: In case your ESC at present has BLHeli_32 and also you want to flash AM32 to it, the flash course of is extra advanced as you need to set up the AM32 bootloader first. You’ll find detailed directions right here: https://oscarliang.com/flash-am32-blheli32-esc/. In case your ESC is already working AM32 firmware, comply with the steps on this information to replace/flash it.

Additional Readings:

I’ve been utilizing AM32 ESCs for some time now, and the flashing and updating course of has been easy. The configurator is user-friendly, and the flexibility to again up and restore settings is handy.

The place to Get AM32 Configurator

The AM32 Configurator is a web based device you’ll use to flash, replace, and configure your AM32 ESCs. No obtain or set up is required. Simply go to: https://am32.ca/

Within the prime heart menu, choose the ‘Configurator’ tab.

Connecting to AM32 Configurator

Warning: Be certain that to take away all propellers when powering up your drone on the bench, simply in case the motors spool up by chance.

Right here’s the way to join your AM32 ESC to the configurator:

1. Join FC to Laptop: Use a USB cable to attach your flight controller to your laptop.
2. Energy Up Your ESC: Plug in a battery to the drone (with out props).
3. Entry the Configurator: Open AM32 Configurator.
4. Choose the Port: Click on the inexperienced button within the prime proper nook and choose the flight controller’s COM port related to your PC.
5. Join and Learn Settings: Hit the inexperienced join button, then click on ‘Learn’ to load the settings out of your ESC. This course of will show all of the related ESCs.

Getting Error: error – ACK_D_GENERAL_ERROR? Be certain that your ESC is powered by plugging in a battery.

Flashing Firmware

To replace the firmware in your AM32 ESC, comply with these steps:

1. Flash Firmware: Click on the ‘Flash Firmware’ button. A dialog field will seem.
2. Choose ESC and Model: Relying in your ESC, the second area would possibly auto-populate with the ESC model. Select the firmware model you wish to flash, sometimes the newest model.
3. Choose ESCs to Flash: Examine the numbered containers for the ESCs you wish to replace. Simply choose all 4 containers to flash all 4 ESCs.
4. Begin Flashing: Click on the ‘Begin Flash’ button. The method will start and flash the chosen ESCs. It takes about 5 minutes to flash a 4-in-1 ESC.

Be aware: In case your ESC doesn’t auto-populate, you possibly can tick the ‘Ignore present MCU structure’ field, seek for your ESC manually, and proceed with the flashing. This can be a workaround for older firmware variations.

Configuring ESC Settings

Right here’s the way to modify your ESC settings:

1. Entry Settings: As soon as related, you’ll see 4 containers, representing each ESC.
2. Choose All ESC: Guarantee all ESCs are chosen by clicking the containers. When chosen, the field border ought to flip inexperienced; when not chosen, the field border is gray.
3. Reverse Motor Course: If a motor spins within the mistaken route, you possibly can reverse it by ticking the ‘Reversed’ field for the corresponding ESC.
4. 3D Mode: Don’t examine 3D mode except you wish to fly 3D, which permits the motors to vary route mid-flight.
5. Configurations Defined: I’ve an entire tutorial explaining what every setting does. Hyperlink: coming quickly.
6. Purple Field Border: Upon getting modified a setting and haven’t saved it, the field border will probably be purple. As soon as the settings are saved, the field border will change into inexperienced.
7. Save Adjustments: After making changes, click on the blue ‘Save’ button to use the adjustments (NOT the Save Config button).

Backing Up and Restoring Configurations

It’s good observe to again up your ESC configurations earlier than updating to a brand new model or making any important adjustments:

1. Save Configuration: Click on ‘Save Config’, choose the ESCs you wish to again up, and obtain the backup file (.bin format).
2. Load Configuration: To revive a configuration, click on ‘Apply Config’, choose the saved bin file, and apply it to the ESCs.

Conclusion

Flashing and updating your AM32 ESCs might sound daunting, however it’s fairly simple with the precise instruments and steps. The AM32 configurator supplies a user-friendly interface for managing your ESC settings successfully. Whether or not you’re a newbie or an skilled pilot, having up to date and well-configured ESCs will improve your flying expertise. So, dive in, replace your ESCs, and benefit from the easy, dependable efficiency of your FPV drones.