The Orqa Dream X is Orqa’s first Bind-N-Fly (BNF) drone, designed and manufactured within the EU. This 5-inch FPV drone is marketed as a performance-oriented freestyle quad, combining Orqa’s intensive know-how and know-how right into a single bundle. On this assessment, I’ll be diving into the analog model of the Dream X to see the way it stacks up in opposition to the competitors.
The place to Purchase
The Orqa Dream X is out there in two variations: analog and HD. The HD model doesn’t include any digital camera/VTX, so you’ll be able to set up your personal. This assessment focuses on the analog model.
You should buy the Dream X BNF 5″ Drone from Orqa right here: https://oscarliang.com/product-pg2o
Orqa FPV.CTRL Radio: https://oscarliang.com/product-az53
Orqa FPV.One Pilot Goggles: https://oscarliang.com/product-n3mt
Be aware: The LiPo battery is just not included. Orqa recommends utilizing a 6S 1000-1500mAh battery. You possibly can see my suggestions right here: https://oscarliang.com/lipo-battery-guide/#5percentE2percent80percentB3-Freestyle-and-Racing-Drones
Get some spare props
Promoting Factors
Orqa touts the Dream X as a high-performance freestyle FPV drone with the comfort of a real BNF (bind-and-fly) expertise. The drone is totally tuned on the manufacturing facility and able to fly proper out of the field. The bundle is designed for simplicity: take the quad out of the field, unfold the props, connect the battery, bind it to the radio, and also you’re able to fly.
What makes the Dream X notably distinctive is its integration of Orqa’s full suite of know-how:
- Orqa FPV.One Pilot and Race analog goggles
- Orqa FPV.Ctrl radio controller
- Orqa Flight electronics (20×20 stacks, each digital and analog)
- ImmersionRC Ghost RF system (acquired by Orqa a few years in the past)
- ImmersionRC RapidFIRE VRX module for the Goggles
- Upcoming Orqa RTR motor line
A lot of the electronics within the Dream X are designed by Orqa, with the notable exceptions of the “Toothless” FPV digital camera and “Lollipop 4” antenna, that are rebranded by Orqa. The maker is just not explicitly said, however I believe we are able to all guess it’s.
Specs
Analog Model:
- FC/ESC: Orqa FC2020-F722 Analog + 60A 4in1 ESC2020 (20x20mm stack)
- VTX: ImmersionRC Ghost Final Hybrid
- FPV Digicam: Orqa Toothless
- VTX Antenna: Orqa Lollipop 4
- Management Hyperlink: ImmersionRC Ghost
- Motor: Orqa RTR 6S
- Props: Gemfan Floppy Proppy
- Weight (with out battery):
360g371g - Weight (with a 6S 1100mAh): 565g
- Weight (with a 6S 1100mAh and GoPro 11): 719g
- Beneficial Battery: 6S 1000-1500mAh
HD Model:
- FC/ESC: Orqa FC2020-F722 HD + 60A 4in1 ESC2020 (20x20mm stack)
- Video Transmission: Appropriate with any present HD Video System
- Management Hyperlink: ImmersionRC Ghost
- Motor: Orqa RTR 6S
- Props: Gemfan Floppy Proppy
- Weight (with out battery and FPV system): 340g
- Beneficial Battery: 6S 1000-1500 mAh
Body Specs:
- A number of mounting choices for flight electronics
- 6mm arms
- 3mm backside plate
- 2mm mid plate
- 2mm high plate
- Designed for 5-inch propellers with a dry weight of 115g
Motor Specs:
- Dimension: 2207 stator
- KV: 1900KV
- Unibell design
- N55SH curved magnets
- Silver-plated copper wire for effectivity
- NSK684 (4x9x4) bearings
- Titanium TC4 hole shaft
- 4mm shaft diameter
- 2-6S rated enter voltage
- 20AWG silicone motor wires
- Weight: 31.5g (excluding wires)
Design and Construct High quality
Orqa has targeted on constructing a no-nonsense, performance-oriented quad. The body design avoids pointless options like facet plates and LEDs, which retains the load down and improves flight efficiency. The body has a easy but efficient design, makes it simpler to assemble, restore, and keep.
There are 3 locations to your electronics: a 20×20 mount on the entrance, a 20×20 or 30×30 mount within the center, and a 20×20 or 25×25 mount on the rear.
Whereas many frames now include arm guards to guard the carbon fiber when crashing in opposition to concrete, Orqa has opted to not embody them, based mostly on their testing they imagine they don’t seem to be wanted for this body.
Each the digital camera and VTX antenna are mounted utilizing 3D-printed TPU holders, and the quad comes with a common GoPro mount.
The radio receiver antenna is mounted below one of many rear arms utilizing a rubber band – a easy but efficient technique.
The construct high quality is superb; and the eye to particulars is admirable – all screws on the body and motors have threadlock (blue loctite). Nonetheless, the screws may very well be tightened a bit extra to make sure they don’t loosen over time.
Aesthetically, the Dream X is glossy with its black body and pink accents, sticking to Orqa’s trademark colours. Therefore the one pink prop and three black props which is finished on function.
Taking it aside for restore is simple.
Motors and Props
The motors on the Dream X are spectacular, delivering loads of energy and responsiveness. These are Orqa’s new RTR 2207 1900KV motors, with single strand motor windings and unibell design.
The included foldable Gemfan Floppy Proppy F5135 tri-blade props are handy for transportation, however they aren’t the only option for efficiency.
They generate much less thrust, are much less environment friendly than commonplace props. The one benefit I can see is that the quad will be shipped with props put in, however actually it’s not that onerous to put in 4 propellers. For a drone marketed as performance-oriented, I’d have most well-liked commonplace props out of the field.
They’re additionally much less sturdy – one of many props broke within the hub after a couple of crashes.
In my assessment unit, there have been no spare props included, though Orqa has said that the retail bundle will embody additional propellers.
FC and ESC Stack
The Dream X comes with a well-built FC and ESC stack. Nonetheless, one draw back is that the USB port doesn’t energy the receiver, which means you’ll must plug within the battery to bind and configure the quad.
FPV Setup
You should use any analog goggles to fly the Dream X, together with Orqa’s FPV.One Pilot goggles. I reviewed these goggles some time a go: https://oscarliang.com/orqa-fpv-one-pilot-fpv-goggles/
The FPV setup is strong for brief vary freestyle flying and racing, however the digital camera protrudes barely from the body, making it weak in crashes.
The VTX and receiver are mixed in a single board to cut back complexity of the construct, however it solely advantages Ghost customers who fly analog.
The VTX is able to as much as 1.5W of RF output energy, which is nice for lengthy vary. Nonetheless, the VTX antenna is kind of brief and may simply get blocked by the battery throughout flight. For brief vary that is often not an issue, however it’s not excellent for longer vary. This may be resolved through the use of an extended antenna, nonetheless the antenna is just not simply detachable, which may very well be a limitation for some pilots. This may very well be addressed through the use of a UFL to SMA extension cable.
For these excited about digital FPV, the HD model of the Dream X comes with out digital camera and VTX, so you’ll be able to set up any FPV system of your selection. In keeping with Orqa the HD model is suitable with most present HD techniques, though becoming a DJI O3 system could be a good match.
Radio Controller
The Dream X makes use of the ImmersionRC Ghost system, which is simple to make use of and arrange. All the things will be configured through Orqa’s cellular app (search FPV.CTRL in Play Retailer), permitting you to bind, replace firmware, and configure the radio with ease. Nonetheless, it’s essential to disconnect the radio out of your telephone after setup, as it may well mess together with your telephone’s keyboard when linked.
The FPV.CTRL radio controller is fundamental however useful, making it excellent for freshmen. Nonetheless, superior pilots preferring open-source choices like ExpressLRS may discover the dearth of receiver choices a draw back. The Ghost system is closed-source and never as versatile as another choices available on the market.
For newcomers, you’ll be able to both get the FPV.CTRL radio controller, which comes with a fundamental Ghost RF Lite module (put in on the again and detachable).
This radio is okay for freshmen, nonetheless, skilled pilots may want greater finish radios. Personally I discover the gimbals on the FPV.CTRL a bit free across the middle sticks, affecting management really feel. And the tip factors and mid level are a bit off even after calibrations which impacts precision.
You should use the Ghost radio system by choosing their full-size Ghost RF module and use your personal radio with a JR module bay. Listed below are my radio suggestions: https://oscarliang.com/radio-transmitter/#Radio-Suggestions
Whereas you may also use ExpressLRS or TBS Crossfire by connecting a separate receiver within the drone, these receiver choices are usually not out there for buy immediately from Orqa, which is a limitation.
The receiver standing LED is an RGB one, regardless of being able to displaying a spread of colours, will be complicated for customers.
Flight Efficiency
The Dream X delivers a robust and clean flight expertise. It hovers at round 21% throttle when totally charged, the thrust to weight ratio is insane. It was so energy it made low throttle administration fairly arduous, it may well certainly profit from some throttle expo. For freshmen, I believe placing a motor output restrict to cut back the ability can be a good suggestion earlier than you get good at flying 🙂 Flight occasions are respectable, I received round 4:30 to five:00 minutes of freestyle flying.
Switching to plain props noticeably improves each energy and flight time, with the quad hovering at even decrease 19% throttle and 5:00 to five:half-hour of flight time after the change.
Listed below are the gyro/dterm noise graphs from PIDToolbox to your reference (inventory tune utilizing inventory props).
The inventory tune from Orqa is fairly good, with minimal vibrations or wobbles, even in windy situations. Nonetheless, there may be room for enchancment within the PID and filter settings. Maybe they have been being conservative, filters are principally left at default. After spending simply half-hour optimizing these settings, I used to be in a position to additional improve the quad’s efficiency and propwash dealing with. Find out about PID/Filter tuning on this information: https://oscarliang.com/pid-filter-tuning-blackbox/
Person Expertise and Issues
Whereas the FPV.Ctrl radio works tremendous, it lacks among the options and high quality discovered in additional superior radios. The dearth of a display screen means most configurations must be made by means of the cellular app.
For these closely invested in open-source software program comparable to EdgeTX and ExpressLRS, the FPV.CTRL radio and ImmersionRC Ghost system may really feel over simplified and restrictive. Nonetheless, for newcomers or these searching for a extra plug-and-play expertise, the convenience of setup and use with the Ghost system could be a important benefit, eliminating steep studying curve. Efficiency clever it’s a very succesful system for freestyle and racing.
A couple of issues may very well be improved: the flexibility to alter VTX settings immediately from the OSD menu (proper now you’ll be able to solely do that within the android app), together with spare props within the bundle (at the moment it solely comes with 1 set), including a buzzer for misplaced drone restoration, and together with GPS for Rescue Mode.
Methods to Setup
Setting Up the Radio
Binding the radio to the drone is finished by means of the FPV.Ctrl telephone app. Comply with the prompts to bind the radio and arrange your controls. The endpoints and midpoints may have slight changes in Betaflight, however this gained’t forestall you from flying the drone.
Setting Up Betaflight
Orqa has accomplished a strong job with the Betaflight configuration, and never a lot must be modified. Default CLI diff will be discovered right here.
- Configuration Tab:
- Set Arming Angle to 180
- Allow DShot Beacon is a should since there’s no beeper onboard
- PID Tuning Tab:
- Set your charges
- You possibly can strive my customized PID/filter tune (make sure you again up the prevailing config first in case you wish to return)
- Modes:
- Set your arm swap
- Take away Horizon mode if not wanted
- Energy:
- Present sensor scaling appears a bit low, setting it to 116 is extra correct for me
Conclusion
The Orqa Dream X 5″ FPV drone provides a compelling bundle for each freshmen and superior pilots. It comes optimized as a freestyle/racing drone and flies exceptionally properly proper out of the field. The setup is simple with Orqa’s personal radio and FPV goggles, however you continue to have the flexibleness to make use of your personal radio and goggles in the event you want.
Nonetheless, the dearth of GPS, buzzer, and a brief non-removable VTX antenna makes it much less excellent for long-range and cinematic flying. The Dream X is a strong platform, and customers can add these lacking options to make it a extra versatile FPV drone. I do hope Orqa will supply a model with all these options in a extra superior BNF configuration sooner or later.
Whereas there are a couple of areas for enchancment, the general expertise is optimistic, and Orqa’s dedication to high quality and efficiency is clear. If you happen to’re out there for a BNF drone that requires minimal setup and delivers sturdy efficiency, the Dream X is price contemplating.
